The mast may also be attached to a support structure using U-bolts or lag screws. The WindLog includes a support mast that can be used with the RainWise Mono Mount and Tripod. It also can export CSV files for use with Microsoft Excel or any other application that supports CSV files. By combining both logged and real-time data, the WindLog can be used both online and offline. Downloaded data is integrated into the database. The AEMC 1227 is a portable, easy-to-use instrument which uses an airflow sensor designed to accurately measure and log airflow or wind speed. Datalogger date/time stamps and stores readings on an SD card in Excel format. While connected, WindSoft will update the database every minute. Measures Air Temperature to 122F (50C) and air velocity to 4930ft/min. The software uses an SQLite database to track and record wind information. Data logger to measure air temperature and velocity with calculation of. A USB extender is available that will allow you to extend this cable to 100-foot using CAT5e network cable.Įach WindLog ships with a free Windows-based application, WindSoft. Thermal Anemometer Data Logger PCE-009-ICA incl. Wind Speed Data Logger: The anemometer has a Data Hold, Storage, Read. The WindLog ships with a 15-foot USB cable. Temperature, Humidity with Data Logger for HVAC Duct, Outdoor: Wind Speed. When connected to a computer, the WindLog will use the USB ports power to run, further extending the battery life. The typical life should be around six months. Lithium batteries are recommended for cold environments. The data logger operates on 3 AA Alkaline or Lithium batteries. Logged direction readings are averaged readings. The wind direction sensor has a 16-point resolution. Wind extension cables that separate the wind sensor from the WindLog are available in 50-foot or 100-foot length. With 8 megabits I figured I could collect about a week's worth of data. I wrote a simple program that logged two-byte rotation counts every second. I thought about going SD, but I wanted to keep the cost, power consumption, and complexity low. This reduces the threshold to approximately 1 mile per hour. The data logger is simply an Atmega328P with an 8 mbit flash chip. The Mini-Aervane wind sensor is equipped with low friction race bearings. The 2 MB memory can record for over three months at a 1-minute rate and store over a year’s worth of wind data at a 10-minute logging interval. User selectable logging intervals range from 1-minute to 1-hour. Users can choose to spot record or record continuously for up to 1,000,000 measurements, which are stored in the 8MB flash memory.The WindLog samples data every second and stores both average and gust readings at the user-selected interval. AEMC's unique map mode profiles the air flow of an area or room by storing multiple measurements. Using the supplied DataView software, this AEMC thermo-anemometer data logger can perform a variety of recording tasks with simple set-up via a computer. The 03101 connects directly to a Campbell Scientific data logger. With the AEMC 1227 thermo-anemometer data logger users can find min, max and average readings on the display and, additionally, the hold function can freeze the backlit display at any time. You can purchase it separately if your application requires only wind speed measurements. The removable anemometer features an expandable cord up to 48 inches and offers four selectable units for wind speed or air flow measurement. With an ergonomic case, large backlit display and intuitive function selection, the AEMC 1227 is designed for one-handed operation. The AEMC 1227 thermo-anemometer data logger is a portable, easy-to-use instrument which features an airflow sensor that is designed to accurately measure and log air flow or wind speed.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |